Why should I test my water?

There are many reasons why you might want to test your water. You may have a specific concern, such as a change in taste or odor, or there may have been a recent environmental incident. In addition, many banks now require water testing for home loans if there is a well on the property. Whatever the reason, Capco Analytical Services, Inc. can administer the appropriate test for your specific needs.

back to top

How often should I test my water?

We suggest regular analysis of your water to keep informed of your water condition. Most experts on well water suggest annual testing to ensure it hasn’t changed. And while public water is usually safe at its source, old water distribution systems and plumbing systems can contaminate your water. Regular testing ensures top quality water. For your first test (and again after about a year), we recommend our Comprehensive Scan.

back to top

How do I know which test to choose?

Our water testing packages detects commonly found contaminants, and is usually sufficient when there are no concerns, but depending on your particular concerns, you may want to administer another test. Visit our water testing packages, or our Other Tests page for a full description. If you have any questions, please contact us to speak with one of our lab experts.

back to top

Where should I take my water sample?

Samples are best taken from the area from which people drink the most water-usually the kitchen. Remove any mixers or purifiers from the tap you plan to use, leave the aerator if that’s all there is and let cold water run for about 5 minutes to flush standing water in the pipes.

back to top

What kind of container should I use for my water sample?

Use a sterile glass or plastic bottle, or a glass vial (to test for VOC’s). Fill the container slowly to eliminate air bubbles (air bubbles that occur after the container is closed do not affect sample), and use caution not to contaminate the inside of the container or the lid. Secure the lid tightly, and deliver by hand, or by overnight or second-day mail. If you have any questions please contact us to speak with one of our lab experts.

back to top

How much water do I need?

We will send you the appropriate container for your specific test(s). About 125 ml (4-5 oz) of water is adequate for most tests. VOC’s (as in the Complete Analysis test) requires at least 40 ml (1.5 oz.). Analyzing Pesticides and Herbicides requires at least one liter. For the Environmental Scan, we will require all the above plus an additional liter of water in a plastic container.

back to top

Before taking a water sample, do I need to disinfect the faucet?

Many people wipe the faucet with alcohol or run a lit match around the end of it. These are common procedures to kill any bacteria that may be present, but if you fill your containers correctly, there is no need to do either of these.

back to top

Should I run the water prior to taking a water sample?

Running your water for 5 minutes is adequate for a house that is currently being lived in under normal circumstances. For homes that have been unoccupied for several weeks or longer, run the water for several hours. If you’re concerned about running your well dry, contact the well installer or a plumber for assistance.

back to top

I’m taking a sample from a new well. What should I do?

This is normally done by the well driller or well pump installer. If you decide to do it yourself, you should plan on taking several samples to ensure quality water. It often takes several days of pumping to remove the silt and residue from drilling. Perform the Comprehensive Scan, and keep pumping until you obtain the desired water quality.

back to top

How do I get my sample to Capco Analytical Services, Inc.?

You can hand deliver your sample to our lab, or send it to us via overnight or second day delivery. In special cases, overnight or same day delivery may be required.

back to top

Do I need to keep my water sample cold during shipment?

Only in special cases is cold shipping advisable. Check with the Hold Time on Samples link or call Capco Analytical Services, Inc. if you have a concern in this area.

back to top

How long does it take to get my results?

Capco provides expedited five working day turnaround times at no additional charge, resulting in a timely cost effective service. Capco also offers shorter turnaround times at normal surcharges when the need for analytical results is critical.

back to top

How do I view my report?

We can e-mail, fax your report, the original is always mailed normally.

back to top

When will my report be mailed?

Your report will be mailed on the business day following the day it is prepared.

back to top

Why does my hot water smell like rotten eggs (sulfur)?

This complaint is most often caused by microorganisms growing in your hot water tank. That can happen when the temperature of your hot water is low or the organisms are coming from the incoming water. In these cases, we suggest the Health Scan.

back to top

Why do my hot and cold water smell like rotten eggs (sulfur)?

It is our experience that the most cost effective way to approach this is to test the water to our Health Scan. This odor is typically caused by micro-organisms. The Health Scan identifies organisms which may be a health concern and cause of the odor.

back to top

Why does my water smell swampy?

We find that microorganisms are typically the cause for odors. We suggest the Health Scan for this concern.

back to top

My bank wants me to test my water. What analysis should I do?

Our Comprehensive Scan will provide the results your bank needs.

back to top

Why do I have orange or red/brown stains on my dishwasher, toilet and other plumbing fixtures?

The culprit(s) could be various naturally occurring elements. We suggest the Comprehensive Scan for these concerns.

back to top

Why do I have blue green stains on my tub, toilet and other plumbing fixtures?

The culprit(s) could be various naturally occurring elements. We suggest the Comprehensive Scan for these concerns.

back to top

Why do I have a white powdery substance on my ice cubes and/or icemaker?

The culprit(s) could be various naturally occurring elements. We suggest the Comprehensive Scan for these concerns.

back to top

Why does my laundry have black or gray stains?

The culprit(s) could be various naturally occurring elements. We suggest the Comprehensive Scan for these concerns.

back to top

I’m concerned about septic leaking into my well. What analysis do I need to do?

We will test for Total Coliform, Fecal/E. coli, Nitrate, Nitrite, Ammonia and Volatile Organic Compounds. The Comprehensive Scan covers all of these.

back to top

What is Hardness or Hard water? How does it affect my drinking water?

Hardness is a term used to measure the presence of calcium and/or magnesium in water along with other elements. Hard water is not dangerous, but can cause white spots on glasses washed in your dishwasher, poor soap sudsing and plumbing deposits, which will eventually restrict water flow. We suggest our Comprehensive Scan for these concerns.

back to top